* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Върнатите артикули ще бъдат приети в рамките на 40 дни от датата на получаване на стоките. Персонализираните артикули не могат да бъдат върнати или заменени. Артикулите, закупени с електронна карта за подарък, подлежат само на замяна; възстановявания не са приложими.
Безплатен подарък
Добре дошли в Roymall, вашия професионален уебсайт за закупуване на висококачествени подаръци от универсален магазин. Ние високо ценим и оценяваме вашата подкрепа и искаме да изразим нашата благодарност, като добавим допълнителен елемент на вълнение към вашите покупки. Когато пазарувате при нас, вие не само получавате висококачествени продукти, които подобряват вашия начин на живот, но ще получите и ексклузивен безплатен подарък с всяка поръчка, която направите.Готови ли сте да разгледате нашата колекция и да намерите перфектните подаръци за вас? Разгледайте нашата селекция от висококачествени артикули от универсален магазин, направете поръчката си и очаквайте вълнението от вашия безплатен подарък, който ще пристигне заедно с покупката ви.
Политика за доставка
Ние ще работим усилено, за да доставим артикулите до вас след получаване на вашите поръчки и ще се погрижим те да пристигнат безопасно. Подробности за доставката ще бъдат предоставени в имейла за потвърждение.В повечето случаи поръчките се обработват в рамките на 2 дни.При специални обстоятелства ще бъде забавено, както следва: Когато направите поръчка в събота, неделя или по време на официални празници, тя ще бъде забавена с 2 дни..Обикновено са необходими 5-7 работни дни (от понеделник до петък), без да се влияе от забавяне на полета или други фактори на околната среда..Тъй като нашата услуга за доставка е световна, времето за доставка ще зависи от вашето местоположение, така че може да отнеме известно време и моля, изчакайте търпеливо, ако се намирате в отдалечени райони или страни.
1. Политика за връщане и замяна
Ние приемаме само артикули, закупени от roymall.com. Ако закупите от нашите местни дистрибутори или други търговци на дребно, не можете да ги върнете при нас.Артикулите за окончателна продажба или безплатни подаръци не се приемат за връщане.За да бъде допустимо връщане, вашият артикул трябва да е неизползван и в същото състояние, в което сте го получили. Трябва също да е в оригиналната опаковка.След като получите инструкции за връщане от нас, моля, опаковайте върнатите артикули и оставете вашия пакет в местната поща или друг куриер. Ние ще обработим вашия върнат или заменен артикул в рамките на 3-5 работни дни, след като го получим. Възстановяването ще бъде обработено и кредитирано автоматично към вашия оригинален метод на плащане.Не могат да се приемат връщания или замени, ако продуктът е произведен по поръчка, включително персонализиран размер, персонализиран цвят или персонализиран печат.Нуждаете се от повече помощ, моля, свържете се с нас. service@roymall.com или Whatsapp: +447549870296
2.Политика за възстановяване
Ще получите пълно възстановяване или 100% кредит в магазина, след като получим върнатия пакет и го проверим. Възстановяването ще бъде обработено и кредитирано автоматично към вашия оригинален метод на плащане.Моля, обърнете внимание, че разходите за доставка и всякакви мита или такси не подлежат на възстановяване. Допълнителните разходи за доставка не подлежат на възстановяване, след като пакетът е изпратен. Вие сте отговорни за плащането на тези такси и ние не можем да ги отменим или възстановим, дори ако поръчката се върне обратно при нас.След като получим и потвърдим вашия върнат артикул, ще ви изпратим имейл, за да ви уведомим, че сме получили вашия върнат артикул. Ще ви уведомим и за одобрението или отхвърлянето на вашето възстановяване.Ако имате някакви проблеми относно процеса на възстановяване, моля, свържете се с нас. service@roymall.com или Whatsapp: +447549870296
Specification:
1.Input Voltage: DC10-14V 2.Standby Current: <5MA 3.RF Frequency: 433MHZ 4.RF Working mode:Super heterodyne receiver 5.Receiver Sensitivity: >90dBm 6.Remote Control Distance: >100 meter(In open environment) 7.Decoding Way: MCU Software decoding 8.Can store the number of remote control:50 9.Support remote control type: Fixed code, learning code 10.Channel: 1CH 11.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off) 12.Wiring Method:Fixed wiring terminal 13.Working Voltage: DC12V 14.Output Current: 10A 15.Rated load:10A 250VAC / 10A 125VAC 10A 30VDC / 10A 28VDC 16.Output:Normally open,Common,Normally closed 17.Dimension:3.5cm*3cm*1.6cm
Working/output way:
1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control. 2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control. 3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control. 4.Delay: Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Description:
1.Jog: Press the learning button then release, set the mode from the system automatically working mode to action mode, wait for a while, when the board LED off, said it is into the learning state, press the remote control, the system received the signal. The LED flashes 5 times and goes off again. After 3S delay, LED light marked learning success, the system automatically withdraw from the learning state. 2.Self-locking: Press the learning button, then release, press 2 times, the system automatically set to self-locking mode, wait for a while, LED off, it is into the learning state, press the remote control, LED flash 5 times Off. 3S after the delay, LED light learning success. 3.Interlock: press the learning button, then release, press 3 times in succession, the system is set to interlock mode. 4.Delay: Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Great product, and a great price, however the instructions are somewhat vague and confusing. What you need to do is press the learning button on the module multiple times, so two times to learn a latching code, and three times to learn separate ON and OFF buttons etc.
To cancel all codes, press the button 8 times.
Great product, and a great price, however the instructions are somewhat vague and confusing. What you need to do is press the learning button on the module multiple times, so two times to learn a latching code, and three times to learn separate ON and OFF buttons etc.
To cancel all codes, press the button 8 times.
Great product, and a great price, however the instructions are somewhat vague and confusing. What you need to do is press the learning button on the module multiple times, so two times to learn a latching code, and three times to learn separate ON and OFF buttons etc.
Come da inserzione di vendita. Ottimo rapporto qualità/prezzo. Consegna nei tempi previsti.
Purtroppo dalla descrizione dell'inserzione non si capisce molto bene come programmare questi moduli. Ho pensato di essere d'aiuto scrivendo una piccola guida
- RELE' SU ON QUANDO SI TIENE PREMUTO IL TASTO DEL TELECOMANDO RELE' OFF QUANDO SI RILASCIA IL TASTO DEL TELECOMANDO
premere 1 sola volta il pulsante sul modulo
il led sul modulo rimane acceso
premere il pulsante del tasto del telecomando che si vuole programmare
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PREMENDO IL TASTO SUL TELECOMANDO RIMANE SU ON ANCHE DOPO AVERLO RILASCIATO RELE' SU OFF QUANDO SI PREME LO STESSO TASTO DEL TELECOMANDO
premere 2 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il pulsante del tasto del telecomando che si vuole programmare
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON SE SI PREME UN TASTO SUL TELECOMANDO RELE' SU OFF SE SI PREME UN ALTRO TASTO SUL TELECOMANDO
premere 3 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 5 SECONDI
premere 4 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 10 SECONDI
premere 5 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 15 SECONDI
premere 6 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
RESET
- premere 8 volte il pulsante sul modulo
il led sul modulo flash 4 volte e poi si spegne
Come da inserzione di vendita. Ottimo rapporto qualità/prezzo. Consegna nei tempi previsti.
Purtroppo dalla descrizione dell'inserzione non si capisce molto bene come programmare questi moduli. Ho pensato di essere d'aiuto scrivendo una piccola guida
- RELE' SU ON QUANDO SI TIENE PREMUTO IL TASTO DEL TELECOMANDO RELE' OFF QUANDO SI RILASCIA IL TASTO DEL TELECOMANDO
premere 1 sola volta il pulsante sul modulo
il led sul modulo rimane acceso
premere il pulsante del tasto del telecomando che si vuole programmare
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PREMENDO IL TASTO SUL TELECOMANDO RIMANE SU ON ANCHE DOPO AVERLO RILASCIATO RELE' SU OFF QUANDO SI PREME LO STESSO TASTO DEL TELECOMANDO
premere 2 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il pulsante del tasto del telecomando che si vuole programmare
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON SE SI PREME UN TASTO SUL TELECOMANDO RELE' SU OFF SE SI PREME UN ALTRO TASTO SUL TELECOMANDO
premere 3 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 5 SECONDI
premere 4 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 10 SECONDI
premere 5 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 15 SECONDI
premere 6 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
RESET
- premere 8 volte il pulsante sul modulo
il led sul modulo flash 4 volte e poi si spegne
Come da inserzione di vendita. Ottimo rapporto qualità/prezzo. Consegna nei tempi previsti.
Purtroppo dalla descrizione dell'inserzione non si capisce molto bene come programmare questi moduli. Ho pensato di essere d'aiuto scrivendo una piccola guida
- RELE' SU ON QUANDO SI TIENE PREMUTO IL TASTO DEL TELECOMANDO RELE' OFF QUANDO SI RILASCIA IL TASTO DEL TELECOMANDO
premere 1 sola volta il pulsante sul modulo
il led sul modulo rimane acceso
premere il pulsante del tasto del telecomando che si vuole programmare
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PREMENDO IL TASTO SUL TELECOMANDO RIMANE SU ON ANCHE DOPO AVERLO RILASCIATO RELE' SU OFF QUANDO SI PREME LO STESSO TASTO DEL TELECOMANDO
premere 2 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il pulsante del tasto del telecomando che si vuole programmare
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON SE SI PREME UN TASTO SUL TELECOMANDO RELE' SU OFF SE SI PREME UN ALTRO TASTO SUL TELECOMANDO
premere 3 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 5 SECONDI
premere 4 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 10 SECONDI
premere 5 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
- RELE' SU ON PER 15 SECONDI
premere 6 volte il pulsante sul modulo
il led sul modulo rimane acceso
premere il primo pulsante del tasto del telecomando che si vuole programmare come ON
premere il secondo pulsante del tasto del telecomando che si vuole programmare come OFF
il led sul modulo flash 2 volte e poi si spegne
RESET
- premere 8 volte il pulsante sul modulo
il led sul modulo flash 4 volte e poi si spegne
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-12 of 12|
Show Original
A part of the QA has been auto-translated.
0
Q:
is my understanding correct, that channel could operate with 220V up to 10A? so I can switch on / off heater up to 2KWt and lamps?
is my understanding correct, that channel could operate with 220V up to 10A? so I can switch on / off heater up to 2KWt and lamps?
Can I use four of this Single channel receivers with a 4-button control transmitter? Can the 4 buttons of the transmitter operate 4 separate receivers?
Can I use four of this Single channel receivers with a 4-button control transmitter? Can the 4 buttons of the transmitter operate 4 separate receivers?
Yes it can. each button on the four button remote can control a different receiver or each button can control multiple receivers. I have just tested it, works well either way.
Yes it can. each button on the four button remote can control a different receiver or each button can control multiple receivers. I have just tested it, works well either way.
Answered by fishing_phil on 26/03/2019Helpful (0)
0
Q:
when i reset the relay with push the buttom 8 x times the relay going out of work. can not program now, only the led flash when i push any buttom of the remote. before i push the buttom 8x times, the relay works perfectly.
when i reset the relay with push the buttom 8 x times the relay going out of work. can not program now, only the led flash when i push any buttom of the remote. before i push the buttom 8x times, the relay works perfectly.
Hello, Could anyone advice how to add local button / switch to this module to male it work by its press like from radio module (in parallel)? I see Do pins on radio module, but can not reverse how it sends commands to controller... Maybe anyone did the same.
Hello, Could anyone advice how to add local button / switch to this module to male it work by its press like from radio module (in parallel)? I see Do pins on radio module, but can not reverse how it sends commands to controller... Maybe anyone did the same.
you just connect an external switch in parallel (either as a pushbutton as on-while-hold or a permanent on-off). I you dont know how to connect a switch in parallel, dont mess with it.
you just connect an external switch in parallel (either as a pushbutton as on-while-hold or a permanent on-off). I you dont know how to connect a switch in parallel, dont mess with it.
Answered by Gearlos on 04/04/2023Helpful (0)
0
Q:
Do you have a wring diagram and programming instructions?
Do you have a wring diagram and programming instructions?
you can use this remote control:https://www.banggood.com/433Mhz-Transmitter-Wireless-Remote-Control-Switch-12V-4CH-Channel-p-1018573.html it learn code from the receiver
you can use this remote control:https://www.banggood.com/433Mhz-Transmitter-Wireless-Remote-Control-Switch-12V-4CH-Channel-p-1018573.html it learn code from the receiver
Answered by Lolboat on 07/04/2018Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.